THE RAINTAKER® SOLAR BILGE PUMP
Automatic, solar-powered bilge pump for your boat, boat cover, RIBB or aluminum dinghy.
THE RAINTAKER® SOLAR BILGE PUMP WORKS DAY AND NIGHT TO REMOVE WATER FOR YOU.
Tired of rain filling your boat while you are away? Tired of arriving to your boat only to see a cover full of water?
The Raintaker® Solar Bilge Pump was engineered from the ground up to be a lightweight, automatic solar marine pump. The Raintaker® Solar Bilge Pump removes very low levels of water, making it perfect for automatic water removal from your boat cover or bilge area. Designed specifically to combat the intense summer rainstorms that flood your boat / boat cover in mere minutes.
Leave your boat moored in the water? Leave the Raintaker in your bilge area for automatic water removal.
Trailer your boat? Use the Raintaker on your boat cover to avoid the 100’s of lbs of water that accumulate during rainy days.
The Raintaker® Solar Bilge Pump uses sunlight to charge its batteries, keeping your boat / cover free of rainwater for months on end.
Raintaker® will remove over 1000lbs (120 gallons) of water on a single solar charge (even at night!)
The Raintaker® is built with industrial grade ABS, Carbon Composite and 316 Stainless Steel to ensure durability and longevity in all marine conditions.
Weighing less than 4lbs and measuring 9” x 6”, our solar bilge pump is incredibly lightweight, making it easy to handle and place wherever you need automatic water removal.
The portable, lightweight design of our solar bilge pump also allows automatic, computer-controlled water removal from your boat cover, tarp, sails, or awnings. Raintaker® can be left outside for months on end, keeping your boat cover clear of water. You no longer have to spend the time or effort setting up cover support poles after a long day of boating.
Raintaker® Solar Bilge Pump is designed, weather tested and manufactured in the U.S.A.
The Raintaker® comes equipped with:
Computer controlled water discharge system - modulates flow as needed to remove water from 1” depth or less. Internal sensor detects water accumulation (no float switch to worry about).
Electropolished 316L Stainless Steel intake grate, won’t rust or corrode. Perfect for salt water usage. Discharge port is also 316L Stainless steel.
Low profile, ABYC - (American Boat & Yacht Council) - compliant high-torque pump.
6.5’ silicone discharge hose to quickly and efficiently remove water out of your boat and / or boat cover. UV rated hose won’t break or split, even in the harshest environments.
Internal solar rechargeable battery to ensure maximum pumping efficiency.
Proprietary built-in solar panel system to keep Raintaker functioning at peak performance for weeks / months on end.
120V AC Wall cord for battery preconditioning after storage / shipping.
3M foam bottom to ensure Raintaker® stays in place during high winds. Won’t scratch or mar your finish.
Designed for a wide range of climates. (Temperature range 36F-110F)
2 year, No-Hassle warranty.
Want to use Raintaker® in covered areas where it’s inaccessible to daylight? Click here for the Raintaker Marine 25’ 12V CABLE.
NO ASSEMBLY, SETUP OR MAINTENANCE REQUIRED.
See our QUICK START GUIDE ON USING YOUR RAINTAKER®
Questions? Contact us directly here.
Visit the RAINTAKER® FAQ.
30 Day Returns if you’re unhappy with Raintaker®. We’ll take it back and refund your purchase price.
*WE CAN SHIP INTERNATIONALLY - CONTACT US FOR A SHIPPING QUOTE
Automatic, solar-powered bilge pump for your boat, boat cover, RIBB or aluminum dinghy.
THE RAINTAKER® SOLAR BILGE PUMP WORKS DAY AND NIGHT TO REMOVE WATER FOR YOU.
Tired of rain filling your boat while you are away? Tired of arriving to your boat only to see a cover full of water?
The Raintaker® Solar Bilge Pump was engineered from the ground up to be a lightweight, automatic solar marine pump. The Raintaker® Solar Bilge Pump removes very low levels of water, making it perfect for automatic water removal from your boat cover or bilge area. Designed specifically to combat the intense summer rainstorms that flood your boat / boat cover in mere minutes.
Leave your boat moored in the water? Leave the Raintaker in your bilge area for automatic water removal.
Trailer your boat? Use the Raintaker on your boat cover to avoid the 100’s of lbs of water that accumulate during rainy days.
The Raintaker® Solar Bilge Pump uses sunlight to charge its batteries, keeping your boat / cover free of rainwater for months on end.
Raintaker® will remove over 1000lbs (120 gallons) of water on a single solar charge (even at night!)
The Raintaker® is built with industrial grade ABS, Carbon Composite and 316 Stainless Steel to ensure durability and longevity in all marine conditions.
Weighing less than 4lbs and measuring 9” x 6”, our solar bilge pump is incredibly lightweight, making it easy to handle and place wherever you need automatic water removal.
The portable, lightweight design of our solar bilge pump also allows automatic, computer-controlled water removal from your boat cover, tarp, sails, or awnings. Raintaker® can be left outside for months on end, keeping your boat cover clear of water. You no longer have to spend the time or effort setting up cover support poles after a long day of boating.
Raintaker® Solar Bilge Pump is designed, weather tested and manufactured in the U.S.A.
The Raintaker® comes equipped with:
Computer controlled water discharge system - modulates flow as needed to remove water from 1” depth or less. Internal sensor detects water accumulation (no float switch to worry about).
Electropolished 316L Stainless Steel intake grate, won’t rust or corrode. Perfect for salt water usage. Discharge port is also 316L Stainless steel.
Low profile, ABYC - (American Boat & Yacht Council) - compliant high-torque pump.
6.5’ silicone discharge hose to quickly and efficiently remove water out of your boat and / or boat cover. UV rated hose won’t break or split, even in the harshest environments.
Internal solar rechargeable battery to ensure maximum pumping efficiency.
Proprietary built-in solar panel system to keep Raintaker functioning at peak performance for weeks / months on end.
120V AC Wall cord for battery preconditioning after storage / shipping.
3M foam bottom to ensure Raintaker® stays in place during high winds. Won’t scratch or mar your finish.
Designed for a wide range of climates. (Temperature range 36F-110F)
2 year, No-Hassle warranty.
Want to use Raintaker® in covered areas where it’s inaccessible to daylight? Click here for the Raintaker Marine 25’ 12V CABLE.
NO ASSEMBLY, SETUP OR MAINTENANCE REQUIRED.
See our QUICK START GUIDE ON USING YOUR RAINTAKER®
Questions? Contact us directly here.
Visit the RAINTAKER® FAQ.
30 Day Returns if you’re unhappy with Raintaker®. We’ll take it back and refund your purchase price.
*WE CAN SHIP INTERNATIONALLY - CONTACT US FOR A SHIPPING QUOTE
Automatic, solar-powered bilge pump for your boat, boat cover, RIBB or aluminum dinghy.
THE RAINTAKER® SOLAR BILGE PUMP WORKS DAY AND NIGHT TO REMOVE WATER FOR YOU.
Tired of rain filling your boat while you are away? Tired of arriving to your boat only to see a cover full of water?
The Raintaker® Solar Bilge Pump was engineered from the ground up to be a lightweight, automatic solar marine pump. The Raintaker® Solar Bilge Pump removes very low levels of water, making it perfect for automatic water removal from your boat cover or bilge area. Designed specifically to combat the intense summer rainstorms that flood your boat / boat cover in mere minutes.
Leave your boat moored in the water? Leave the Raintaker in your bilge area for automatic water removal.
Trailer your boat? Use the Raintaker on your boat cover to avoid the 100’s of lbs of water that accumulate during rainy days.
The Raintaker® Solar Bilge Pump uses sunlight to charge its batteries, keeping your boat / cover free of rainwater for months on end.
Raintaker® will remove over 1000lbs (120 gallons) of water on a single solar charge (even at night!)
The Raintaker® is built with industrial grade ABS, Carbon Composite and 316 Stainless Steel to ensure durability and longevity in all marine conditions.
Weighing less than 4lbs and measuring 9” x 6”, our solar bilge pump is incredibly lightweight, making it easy to handle and place wherever you need automatic water removal.
The portable, lightweight design of our solar bilge pump also allows automatic, computer-controlled water removal from your boat cover, tarp, sails, or awnings. Raintaker® can be left outside for months on end, keeping your boat cover clear of water. You no longer have to spend the time or effort setting up cover support poles after a long day of boating.
Raintaker® Solar Bilge Pump is designed, weather tested and manufactured in the U.S.A.
The Raintaker® comes equipped with:
Computer controlled water discharge system - modulates flow as needed to remove water from 1” depth or less. Internal sensor detects water accumulation (no float switch to worry about).
Electropolished 316L Stainless Steel intake grate, won’t rust or corrode. Perfect for salt water usage. Discharge port is also 316L Stainless steel.
Low profile, ABYC - (American Boat & Yacht Council) - compliant high-torque pump.
6.5’ silicone discharge hose to quickly and efficiently remove water out of your boat and / or boat cover. UV rated hose won’t break or split, even in the harshest environments.
Internal solar rechargeable battery to ensure maximum pumping efficiency.
Proprietary built-in solar panel system to keep Raintaker functioning at peak performance for weeks / months on end.
120V AC Wall cord for battery preconditioning after storage / shipping.
3M foam bottom to ensure Raintaker® stays in place during high winds. Won’t scratch or mar your finish.
Designed for a wide range of climates. (Temperature range 36F-110F)
2 year, No-Hassle warranty.
Want to use Raintaker® in covered areas where it’s inaccessible to daylight? Click here for the Raintaker Marine 25’ 12V CABLE.
NO ASSEMBLY, SETUP OR MAINTENANCE REQUIRED.
See our QUICK START GUIDE ON USING YOUR RAINTAKER®
Questions? Contact us directly here.
Visit the RAINTAKER® FAQ.
30 Day Returns if you’re unhappy with Raintaker®. We’ll take it back and refund your purchase price.
*WE CAN SHIP INTERNATIONALLY - CONTACT US FOR A SHIPPING QUOTE